Air Compressor Makita MAC700 Manual

The Makita MAC700 is a powerful and portable air compressor designed for a variety of applications. It features a 2.0 HP motor, a 4.2-gallon tank, and a maximum pressure of 130 PSI. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance and Care 9. Troubleshooting

Features at a Glance

Key components: Oil-lubricated pump, large tank, easy-to-read pressure gauge, and durable construction.

Feature	Description
Oil-lubricated pump	Provides efficient operation and longer lifespan
4.2-gallon tank	Offers extended run time for various applications
130 PSI maximum pressure	Suitable for a wide range of tools and tasks
Low noise level	Operates quietly for a more comfortable working environment
Portable design	Easy to transport and store

Installation

Unpack the compressor and place it on a stable surface. Ensure proper ventilation during operation.

Connect the air hose to the compressor outlet.
Plug the compressor into a grounded outlet.
Check for any leaks before starting the compressor.

WARNING! Ensure the compressor is on a flat surface to avoid tipping.

First-Time Setup

Power on the compressor and allow it to build pressure before use.

Set the pressure regulator to the desired PSI.
Check all connections for tightness.
Test the compressor with a tool to ensure proper operation.

CAUTION! Do not exceed the maximum pressure rating.

Specifications

Motor Power: 2.0 HP.
Tank Capacity: 4.2 gallons.
Maximum Pressure: 130 PSI.
Noise Level: 79 dB.
Weight: 52 lbs.
Dimensions: 29.5 x 17.5 x 19.5 inches.
Power Source: 120V AC.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel.

Pressure Gauge: Displays current tank pressure.

Regulator: Adjusts output pressure for connected tools.

Connecting Devices

Use appropriate air hoses and fittings for your tools.

Ensure the compressor is off before connecting devices.
Match the hose fittings to the tool requirements.
Turn on the compressor and adjust the pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating the Compressor

Follow the guidelines for safe and effective operation.

Turn on the compressor using the power switch.
Allow the tank to fill to the set pressure.
Connect your air tool and begin operation.

WARNING! Do not operate without proper safety gear.

Maintenance and Care

Regular maintenance is essential for optimal performance.

Check oil levels and change as needed.
Drain the tank regularly to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check outlet and power cord.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Worn bearings	Contact service for repair.
Tank won't fill	Faulty pressure switch	Replace pressure switch.

Service: For assistance, contact Makita customer support.