Makita Air Compressor MAC700 Manual

The Makita MAC700 is a 2.0 HP, 2.6-gallon air compressor designed for a variety of applications. It features a powerful motor, oil-lubricated pump for durability, and a low noise level, making it ideal for both professional and home use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating the Compressor 8. Maintenance 9. Safety Information 10. Troubleshooting

Features at a Glance

Key components: 2.0 HP motor, oil-lubricated pump, 2.6-gallon tank, low noise operation, and quick recovery time.

Feature	Description
Oil-lubricated pump	Provides durability and longevity
Low noise level	Operates at 80 dB for quieter performance
Quick recovery time	Fast refill time for continuous use
Portable design	Lightweight and easy to transport
Pressure gauge	Monitors tank pressure for optimal performance

Installation

Unpack and inspect contents. Place on a stable surface.

Connect the air hose: Ensure a secure connection to the compressor outlet.
Check oil level: Fill with recommended oil if necessary.
Plug into AC power: Ensure the voltage matches the compressor requirements.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the compressor; check for leaks and proper operation.

Set the desired pressure: Use the pressure regulator to adjust.
Test the compressor: Run for a few minutes to ensure functionality.

CAUTION! Always wear safety goggles when operating.

Specifications

Motor Power: 2.0 HP.
Tank Capacity: 2.6 gallons.
Noise Level: 80 dB.
Pressure: Maximum 130 PSI.
Weight: 52 lbs.
Dimensions: 20.5 x 18 x 18 inches.
Power Source: 120V AC.

Controls and Settings

Access controls via the front panel: power switch, pressure regulator, and pressure gauge.

Safety Features: Automatic shut-off at maximum pressure, thermal overload protection.

Connecting Devices

Connect air tools using the appropriate fittings.

Turn off the compressor before connecting tools.
Ensure the air hose is securely attached.

Tip: Use quick-connect fittings for ease of use.

Operating the Compressor

Follow these steps to operate the compressor safely.

Turn on the power switch.
Adjust the pressure regulator to the desired level.
Connect your air tool and begin operation.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Check oil level regularly and replace as needed.
Drain the tank after each use to prevent moisture buildup.
Inspect hoses and fittings for wear and tear.

Safety Information

Always follow safety guidelines when operating the compressor.

Wear safety goggles and ear protection.
Keep the area clear of flammable materials.
Do not operate in wet conditions.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor won't start	Power supply issue	Check power cord and outlet.
Low pressure	Leak in hose	Inspect and replace damaged hoses.
Excessive noise	Worn bearings	Contact service for repair.
Overheating	Blocked air intake	Ensure air intake is clear.

Service: For support, contact Makita customer service.