Makita Battery Operated Air Compressor Manual

The Makita Battery Operated Air Compressor is a portable and efficient tool designed for a variety of inflation tasks. It features a powerful motor, lightweight design, and is powered by Makita's 18V lithium-ion batteries, making it ideal for both professional and DIY use. Below are key sections for safety, features, installation, setup, operation, and troubleshooting.

Features at a Glance

Key components: Compact design, built-in pressure gauge, adjustable pressure settings, and battery-powered operation.

Installation

Unpack and inspect contents. Ensure all components are included.

1. Attach the air hose: Connect the hose to the quick connect coupler.
2. Install the battery: Ensure the battery is fully charged and insert it into the compressor.
3. Check for leaks: Before use, check all connections for air leaks.

WARNING! Ensure all connections are secure before operating.

First-Time Setup

Power on the compressor and set the desired pressure.

1. Set the pressure: Use the pressure adjustment knob to set the desired PSI.
2. Connect the air tool: Attach the air tool to the hose.
3. Test operation: Turn on the compressor to ensure proper function.

CAUTION! Always wear safety goggles when operating the compressor.

Specifications

• Power Source: Makita 18V Lithium-Ion Battery.
• Max Pressure: 120 PSI.
• Tank Capacity: 1.5 gallons.
• Weight: 25 lbs.
• Dimensions: 18 x 12 x 12 inches.
• Operating Temperature: 0°C to 40°C.

Controls and Settings

Access the pressure settings via the adjustment knob located on the front panel. The power switch is also located on the front for easy access.

Indicator Lights: The compressor features LED indicators for battery status and operational readiness.

Connecting Devices

Ensure the compressor is off before connecting any air tools.

1. Connect the air tool: Attach the tool to the air hose.
2. Check connections: Ensure all connections are tight and secure.
3. Power on the compressor: Turn on the compressor to begin operation.

Tip: Always check for leaks before using the compressor.

Operating the Compressor

Follow these steps to operate the compressor effectively.

1. Power on the compressor.
2. Set the desired pressure using the adjustment knob.
3. Connect the air tool and begin operation.
4. Monitor the pressure gauge during use.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

1. Check battery regularly: Ensure the battery is charged and in good condition.
2. Inspect hoses and connections: Look for wear and tear.
3. Clean the compressor: Wipe down the exterior with a dry cloth.

CAUTION! Always unplug the compressor before performing maintenance.

Safety Information

Always follow safety guidelines when operating the compressor.

• Wear safety goggles and hearing protection.
• Do not operate in wet conditions.
• Keep the compressor away from flammable materials.

Regulatory Information

This compressor complies with all applicable safety standards and regulations. For more information, visit the Makita website or contact customer support.

Troubleshooting

Reset: If issues persist, refer to the manual or contact support.

Service: For assistance, contact Makita customer service.