Makita MAC700 2.0 HP Big Bore Air Compressor Manual

The Makita MAC700 is a 2.0 HP Big Bore Air Compressor designed for high performance and durability. It features a cast iron cylinder for increased durability, a large capacity tank for extended run time, and a low noise level for quieter operation. This manual provides essential information on safety, features, installation, operation, and maintenance.

1. Features at a Glance 2. Installation 3. First-Time Setup 4. Specifications 5. Controls and Settings 6. Connecting Devices 7. Operating Instructions 8. Maintenance 9. Troubleshooting

Features at a Glance

Key components: Cast iron cylinder, oil-lubricated pump, large capacity tank, low noise operation, and easy-to-read pressure gauges.

Feature	Description
Cast Iron Cylinder	Increases durability and extends the life of the compressor.
Oil-Lubricated Pump	Provides efficient operation and reduces wear.
Large Capacity Tank	Offers extended run time between refills.
Low Noise Level	Operates quietly for a better working environment.
Easy-to-Read Gauges	Allows for quick monitoring of pressure levels.

Installation

Unpack and inspect the compressor. Place it on a stable surface in a well-ventilated area.

Connect the air hose to the compressor outlet.
Ensure the power supply matches the compressor requirements.
Plug into a grounded outlet.
Check for any leaks before operation.

WARNING! Ensure all connections are secure to prevent accidents.

First-Time Setup

Power on the compressor and follow the setup instructions.

Set the desired pressure using the regulator.
Check all connections for leaks.
Allow the compressor to build pressure before use.

CAUTION! Ensure the area is clear of obstructions during operation.

Specifications

Motor Power: 2.0 HP.
Tank Capacity: 4.2 gallons.
Max Pressure: 130 PSI.
Noise Level: 79 dB.
Weight: 52 lbs.
Dimensions: 29.5 x 18.5 x 20 inches.

Controls and Settings

Access the pressure regulator and on/off switch located on the front panel. The compressor features easy-to-use controls for adjusting pressure settings.

Connecting Devices

Connect air tools using the appropriate fittings. Ensure the compressor is off before making connections.

Turn off the compressor before connecting tools.
Match fittings to the air hose.
Turn on the compressor and adjust pressure as needed.

Tip: Always check for leaks after connecting devices.

Operating Instructions

Follow the guidelines for safe and effective operation of the compressor.

Turn on the compressor and allow it to build pressure.
Use air tools as needed, monitoring pressure levels.
Turn off the compressor when finished.

WARNING! Do not exceed the maximum pressure rating.

Maintenance

Regular maintenance is essential for optimal performance.

Check and change oil as needed.
Inspect air filters regularly and clean or replace.
Drain the tank to remove moisture.

CAUTION! Always unplug the compressor before performing maintenance.

Troubleshooting

Symptom	Possible Cause	Corrective Action
Compressor does not start	Power supply issue	Check power cord and outlet.
No air pressure	Leak or blockage	Inspect for leaks and clear blockages.
Excessive noise	Loose parts	Tighten all screws and fittings.
Overheating	Blocked ventilation	Ensure proper airflow around the compressor.

Service: For assistance, contact Makita customer service.